Buy Raptor Prepration Pads (DA6395)

The Raptor Preparation Pads (DA6395)h are a set of essential surface‑preparation tools designed to help

achieve optimal adhesion and finish quality when applying coatings such as RAPTOR protective paint or similar

products. These pads play a key role in the preparation stage, ensuring surfaces are correctly abraded and clean

before coatings are applied, which is crucial for long‑lasting performance.

Each pack of DA6395 typically contains 10 fine finishing pads that are versatile and easy to use. Unlike coarse

sanding papers, these finishing pads offer a balance of abrasion that’s gentle enough to avoid damage but effective

enough to remove surface contaminants, light oxidation, and loose particles before coating. Their design makes

them suitable for preparing metal, fiberglass, and plastic surfaces — materials commonly found on vehicles, equipment, and industrial parts.

One of the primary benefits of the DA6395 pads ish their ability to work on contoured and irregular

surfaces. Unlike rigid sandpaper sheets that struggle to conform to curves and edges, these pads can flex

slightly, making it easier to prepare areas around wheel arches, frame rails, and complex shapes. This feature

helps ensure that coatings like RAPTOR adhere evenly without leaving weak spots that might later peel or blister. (LRDirect)

The pads can be used in a variety of ways depending

The pads can be used in a variety of ways depending on the surface condition and requirements. They work well dry, providing a suitable level of abrasion for lightly worn areas. However, for smoother preparation and less dust, they can also be used with water or most spirit‑based solvents, helping reduce airborne particles and making cleanup simpler. This versatility adds convenience, especially in workshop settings.

In practice, preparation with DA6395 pads is part of a systematic surface‑preparation process. Initially, loose dirt and contaminants should be removed, followed by degreasing and cleaning. The preparation pads are then used to lightly abrade the surface to promote mechanical adhesion. After this step, surfaces are ready for final cleaning — often with panel wipe cloths — before coatings are applied.

Overall, Raptor Preparation Pads (DA6395) offer a simple, cost‑effective, and versatile solution for prepping a variety of surfaces prior to coating, contributing to better adhesion and more durable protective finishes. (LRDirect)